Low-Cost Wireless Structural Health Monitoring of Bridges
Komarizadehasl S, Lozano F, Lozano-Galant JA et al. · 2022
Nowadays, low-cost accelerometers are getting more attention from civil engineers to make Structural Health Monitoring (SHM) applications affordable and applicable to a broader range of structures. The present accelerometers based on Arduino or Raspberry Pi technologies in the literature share some of the following drawbacks: (1) high Noise Density (ND), (2) low sampling frequency, (3) not having the Internet’s timestamp with microsecond resolution, (4) not being used in experimental eigenfrequency analysis of a flexible and a less-flexible bridge, and…
- 7 sections
- 8,023 words
- About 1 hours to read
- Engineering
Contents
CC BY 4.0. "Low-Cost Wireless Structural Health Monitoring of Bridges" by Komarizadehasl S, Lozano F, Lozano-Galant JA et al., Sensors (Basel, Switzerland) (2022). https://doi.org/10.3390/s22155725. Licensed under CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Peer-reviewed and open access; full text from PubMed Central (PMC9371212). Headings and layout adapted for reading; figures and tables are in the original. Source