Abstract
Authors: Komarizadehasl S, Lozano F, Lozano-Galant JA, Ramos G, Turmo J
Published in: Sensors (Basel, Switzerland) (2022) · doi:10.3390/s22155725
License: CC BY 4.0. This is the authors' peer-reviewed article, shared under its open license. Roovet Academy changed only the layout: headings, and figures and tables described in notes.
Nowadays, low-cost accelerometers are getting more attention from civil engineers to make Structural Health Monitoring (SHM) applications affordable and applicable to a broader range of structures. The present accelerometers based on Arduino or Raspberry Pi technologies in the literature share some of the following drawbacks: (1) high Noise Density (ND), (2) low sampling frequency, (3) not having the Internet’s timestamp with microsecond resolution, (4) not being used in experimental eigenfrequency analysis of a flexible and a less-flexible bridge, and (5) synchronization issues. To solve these problems, a new low-cost triaxial accelerometer based on Arduino technology is presented in this work (Low-cost Adaptable Reliable Accelerometer—LARA). Laboratory test results show that LARA has a ND of 51 µg/√Hz, and a frequency sampling speed of 333 Hz. In addition, LARA has been applied to the eigenfrequency analysis of a short-span footbridge and its results are compared with those of a high-precision commercial sensor.
CC BY 4.0. "Low-Cost Wireless Structural Health Monitoring of Bridges" by Komarizadehasl S, Lozano F, Lozano-Galant JA et al., Sensors (Basel, Switzerland) (2022). https://doi.org/10.3390/s22155725. Licensed under CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Peer-reviewed and open access; full text from PubMed Central (PMC9371212). Headings and layout adapted for reading; figures and tables are in the original.